This is a list of electrolytics that would need to be replaced on an original AKS: described as capacitance/voltage then dims in mm so that you can get the right sized body to fit on the board properly.
PSU:
2200/40 axial (radial would suit better) - diam = 25
1000/50 radial - diam = 25
PCB A
100/16 axial x 5 off - l = 18/diam =6
220/40 axial x 1 off - l=35/diam=12
2u2/16 radial x 8 off - l=12/diam=6
2u2/63 axial x 2 off - l=12/diam =5
PCB B
2u2/50 axial x 1 off - l=18/diam=5
10/16 axial x 2 off - l=10/diam=4
33/10 axial x 5 off - l=12/diam=5
100/16 axial x 1 off - l=18/diam=8
2u2/63 radial x 2 off - l=12/diam=5
PCB C
100/16 axial x 3 - l=18/diam=8
10/16 axial x 2 off - l=12/diam=5